White gold and palladium wedding rings
B6
collection: two tone

White gold and palladium wedding rings
Brushed texture

Price for pair £1570

(Male £840 / Female £730)
where to buy
order on-line
6 31
White gold and palladium wedding rings

Both layers in both rings are made of 585 yellow gold (14k). The effect was achieved due to the different textures of both layers. It is common practice in this collection to differentiate the textures on both layers of the rings. Unfortunately, not all combinations of textures are possible for technological reasons. Both layers can be the same width, the lower layer can be wider than the upper one - here again - two possibilities – they can protrude symmetrically on both sides of the wedding ring or unbalanced - only on one side. By choosing the width of both layers, you can decide how many millimetres the protruding edge of the lower layer should be. they can be different metals, there is gold in three colours - white, yellow and rose, as well as titanium, palladium and platinum. For technological reasons one layer cannot be thinner than 0.8mm, which means that the minimum thickness of the rings from this collection is 1.6mm. Both layers are usually not soldered but mechanically assembled by matching the diameters of both layers. The wedding rings on the photo are a classic example of asymmetrical arrangement of layers.

The price given on the website is approximate, average, it can be different for different sizes of rings. Price given refers to a pair of wedding rings made of 585 gold (14k) and grade 500 palladium. Price based on – male ring size W1/2, band width 6mm, thickness 1.6mm and female ring size M, band width 5mm, thickness 1.6mm.