Wedding rings from the two tone collection with fingerprints inside
B21
collection: two tone

Yellow gold and palladium wedding rings 

satin texture 

Price for pair £1660

(Male £890 / Female £770)
where to buy
order on-line
21 31
Wedding rings from the two tone collection with fingerprints inside

The rings from this collection can come in many variants. The layers can be arranged evenly (as in this implementation), they can be asymmetrically, i.e. on one side you can see the protruding internal metal, as well as symmetrically, i.e. on both sides. Each metal can have a different texture - so there are a lot of combinations, unfortunately not all combinations are possible for technological reasons. Both layers are usually not soldered but assembled mechanically by matching the diameters of both layers. The wedding rings may be the same width, the lower layer may be wider than the upper one then it protrudes. It can protrude symmetrically on both sides of the wedding ring or unbalanced - only on one side. By choosing the width of both layers you can decide how many millimetres the protruding edge of the lower layer should be. The rings have fingerprints which are made during the fitting. They are made directly on the rings with special ink, you can also transfer the prints to the rings from the prints made on paper. The prints themselves are engraved by hand, they do not wear and do not get dirty.

Price based on – male ring size W1/2, band width 6mm, thickness 1.6mm and female ring size M, band width 5mm, thickness 1.6mm.