White gold and palladium wedding rings
collection: two tone

White gold and palladium wedding rings
1.5mm diameter diamond
satin texture

Price for pair £1590

(Male £840 / Female £750)
where to buy
order on-line
2 31
White gold and palladium wedding rings

In the "two tone" collection, the setting of stones has some limitations. When setting the stone, you need to drill a hole in the ring and prepare a suitable nest for the stone to settle. The hole, especially in the upper layer, weakens it since it is usually 0.8mm thick, therefore a large stone cannot be inserted into the narrow upper layer - they must remain on both sides of the appropriate width of the edges. It is impossible to frame several stones side by side across the layer - this causes its cutting. We can use white, black and coloured diamonds as well as precious coloured stones - sapphires, rubies and emeralds. To meet the requests of our customers regarding other stones, we check their availability and confirm the possibility of offering them. The size of the stones in the rings is limited by their thickness. Diamonds have a closely related diameter and height, properly framed they cannot protrude either outside or inside the ring. Rings from the "two tone" collection consist of two layers of metal, they can be the same or be different. We offer gold in three colours - white, yellow and rose as well as titanium, palladium and platinum. For technological reasons one layer cannot be thinner than 0.8mm, which means that the minimum thickness of rings from this collection is 1.6mm. Both layers are usually not soldered together but assembled mechanically by matching the diameters of both layers.

Price based on – male ring size W1/2, band width 6mm, thickness 1.6mm and female ring size M, band width 5mm, thickness 1.6mm.